Ergotron 24-316-026 WorkFit-A, Dual with Worksurface+
Swing for the fences and hit a home run for ergonomics with the WorkFit-A. Its large range of motion lets you swing your full workstation wherever you need it as you work independently or collaboratively, sitting or standing. Easily adjust the position of your dual monitors and keyboard for a comfortable fit that ergonomists approve. Discover more workspace by folding up the keyboard and moving the monitor arm aside.
Ideal for corner workstations or confined areas, WorkFit-A attaches to the rear or side of most surfaces while keeping the keyboard upon the desktop when sitting. Featuring an unprecedented range of motion for a standing desk solution, you can swing your system left, right, up or down.
The height-adjustable arm moves the keyboard and monitor in one simple motion, allowing you to easily sit down or stand up as you work. Fold the keyboard up and push the arm out of the way when you need your desk surface. With its extra vertical reach, this model is well suited for taller users.
•Part Number: 24-316-026
•Description: WorkFit-A, Dual Monitor Sit-Stand Workstation, with Worksurface (polished aluminum/black)
•Includes arm, desk clamp, monitor riser, crossbar bow, monitor pivots (2), worksurface, keyboard tray, assembly fasteners, Velco, cable wrap
•NOTE: Extra-long cables may be required to span between standing and sitting heights
•* Maximum outside width of display is 24.5" (62 cm) when display is 2" (5 cm) thick. This range accommodates most displays with screens up to 24" as well as some displays with screens as large as 26". Actual allowable width of displays will vary slightly depending on display thickness. Note that older versions of this product used a narrower crossbar, which accommodated monitors with screens of up to 22"
•† Weight Capacity: Maximum total load on height-adjustment assembly ≤ 25 lbs (11.3 kg). LCD weight = 4.5–10 lbs (2.0–4.5 kg) each, worksurface ≤ 5 lbs (2.3 kg), keyboard tray ≤ 2 lbs (.9 kg). For proper operation the total maximum weight when added together should not exceed 25 lbs (11.3 kg)
•‡ Lift Range: LCDs and keyboard adjust 20" (51 cm) in tandem; LCDs adjust 5" (13 cm) independently
•Desk Clamp attaches to surface edge 0.78" to 2.6" (2 to 6.5 cm) thick
•NOTE: Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment
•Arm extends up to 42" (107 cm) from back of desk and pushes back to within 18.25" (46 cm) when fully retracted
•Worksurface Dimensions: 22.63" x 9.75" (57.5 x 25 cm)
•Keyboard Tray Dimensions: 27" x 10.7" (68 x 27 cm)
•Keyboard tray can be installed in 3 different positions: centered, offset right or offset left
•Cable management routes and hides cords
•Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
•Can be configured to hold a laptop alongside a monitor: order Conversion Kit (97-617)
•** A Washington State analysis of case studies related to office ergonomics showed a median productivity increase of 12% following an ergonomic intervention. New studies from the Office Ergonomics Research Committee (OERC) suggest that employees who are provided with well-designed ergonomic furniture and are trained to use it see an average productivity increase of 18%
•This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissions of VOC (volatile organic compounds)
•Shipping Dimensions: 37" x 21" x 11.5" (94 x 53 x 29 cm)
•Shipping Weight: 51 lbs (23.2 kg)
Terms and conditions:
Promotion is valid until September 17, 2021.